Dimensions:
- 5 cm diameter
- 4 mm height
- 0.5 mm per level (8 levels)
Print settings:
- Layer height: 0.1mm
- Infill: 15%
- For non multi material printers you'll need to pause the print every 5 layers (1 level if you keep the layer height at 0.1mm) and swap the filament
- For multi material printers the 3mf file I uploaded has the color changes already set
I used 3 colors, starting with a dark wine color, then white, and then a light pink.
To legally sell PRINTED models, you may obtain my permission through this link: https://www.patreon.com/SpikeMix3D
Tags
The author remixed this model.
Differences of the remix compared to the original
Size and hole for the hook