Dividers, Trays and Labels for Ridgid Pro Gear 2.0 Drawers

Trays and dividers to fit the Ridgid Pro Gear 2.0 Drawer toolbox.  Should also fit Keter, Magnusson and other rebrands.

You'll probably need to print the divider on the diagonal, and the trays standing up at 45 degrees with some support to keep it from falling over. Model for left tray can be mirrored to fit on the right.

Use your slicer to add text to the drawer labels – use negative part to make the text sunk in, or make the text part a modifier to print in multiple colors. Try the “face-down” model first, but if you have trouble with the tabs snapping off, use the “standing model”

Original files can be found on OnShape 

https://cad.onshape.com/documents?nodeId=a14d680dd4d930050a4e242e&resourceType=folder