Under-Desk Hook

Only one file is required for printing!

This hook is designed for use with self-stick felt pads which help keep it in place. These pads are required for a snug fit. The hook’s rounded design provides protection to your headphone’s soft padding  

Which stl file should you use?

1. Measure your desk thickness in mm
2. Add 3mm to the thickness number to identify the correct stl file

Example:

1. My desk is 17mm thick
2. Adding 3mm results in 20mm. File to use: DeskHookMinimal-20mm-v1

I recommend rounding down where the calculation output is between available stl files.

Printing deets:

• PLA
• 0.4mm nozzle
• 0.2mm layer height
• 1.26mm wall thickness
• 30% infill
• Gyroid infill pattern
• Support used