Kurama nine-tails - HueForge

Hey friends, here's my latest model.
You can change the size of the X and Y axes,
but DO NOT change the Z axis.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Start with Black
At layer #12 (1.04mm) swap to Jade White
At layer #19 (1.6mm) swap to Yellow
At layer #24 (2mm) swap to Orange for the rest.

Store: https://thinkto3d.etsy.com

Donate: https://paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8

Commercial license: https://patreon.com/Think_3D/membership