Raspberry Pi 4/4b Case (No supports - Single Print - Mountable version included)

Raspberry Pi 4 Case

Includes two models. One includes an extension to the model with a 4mm hole that can be used for a single screw to mount the model to the wall. This is specifically for the Raspberry Pi 4, and will NOT work on Raspberry Pi 3 or previous versions. Movement of components will prevent the previous versions from fitting.

Raspberry Pi 3 Version: https://www.thingiverse.com/thing:3433168

I designed this to be simple yet fully functional, including:

-Printing in one piece

-Require no supports

-Wall mountable (if need be)

-Allow access to camera and board inputs.

Slides in and out one direction. Usually print mine a brim just for adhesion, though not required.

Enjoy and comment about any issues/requests!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.2+

Infill:

20%+

Notes:

No supports needed, print vertically, align along the Y-axis/add brim to prevent any potential knock off.