Saw guide

Printing parameters

On printing parts the best option is set support for everywhere and set support style for organic.

Pins should be printed from contrasting material of 1_SawGuide_010-Bottom material.

Assembly

For build the saw guide you need two screws M6 whith a length of 5cm and 7cm (or more), and two nuts M6, see picture:

The longer screw must be inserted into 07_SawGuide_010_NutHolder-Bottom element, and shorter into 04_SawGuide_010-Nut element.

First nut should be inserted into 03_SawGuide_010-Handle. After screwing the longer screw, the 05_SawGuide_010-NutHolder-Inside element should be screwed onto the end of the screw.

The 06_SawGuide_010-NutHolder-Outside should be inserted into 05_SawGuide_010-NutHolder-Inside part (it should clicked).

Pins (9 pieces) should be inserted into 01_SawGuide_010-Bottom1

The second nut should be inserted into 02_SawGuide_010-Top or into 01_SawGuide_010-Bottom (there are two possibilities).

In the first one the knob is at the bottom:

and in the second one the knob is at the top:

Use 01_SawGuide_010-Bottom one of hole to fast assembly with 03_SawGuide_010-Handle.

First hole:
 

Second hole: