Glasflügel H-201 Libelle

This is astatic model (won't fly) of the H201 Libelle Glider. The model comes into one ready to use bluid plate.

Printed just fine on my Ender 3 with 0.16mm PLA layers, after a slicing done with PusaSlicer. No support needed. Enabling Prusa Slicer Adaptative Variable Height is recommended as it helps printing the wingtips.

No raft or brim used, these would probably be a pain to remove ^^

You may also want to check my full collection: ASK-13, my Br905 Fauvette, my JS3, Janus C, Libelle H205, Horten IVa and my Ka6e.

Finishing

• Basic finishing can be done with just acrylic paint applied with a brush or even using a felt pen.
• For a pro finish I use the following:
  • Rough sanding of the model
  • Apply UV resistant epoxy resin witha brush
  • Fine grain sanding
  • Acrylic paint applied with airbrush
  • Clear acrylic coating applied with airbrush

If you like that model please consider making a small donation to the "Cartable & Sparadrap" charity supporting school for children in Toulouse hospitals. Thanks :-)