BLTouch Biqu B1 Mount Extended

Summary

The mount wasnt low enough for my usage and there wasn't a place to thread the cable for the BLTouch. I added a hole in the mount that works for both the cable (and has a lip to prevent the cable touching the front fan) and ease of access to the needle's adjustment screw.

Mounting

This mount uses the top 2 fan screws (2x M3 x 16mm) of the front fan of the hotend unit.

The BLTouch is screwed into the mount with 2 M3 x 6mm cap screws and are tight fit, no need for bolts or fasteners.

Offset for my setup was -1.03

Print Settings

Printer Brand:

Biqu

Printer: 

Biqu B1

Rafts:

Doesn't Matter

Supports: 

Yes

Resolution:

0.2

Infill: 

20%

Filament: eSun PLA+ Black

Category: 3D Printer Accessories

Remix from iNardex's mount on thingiverse: https://www.thingiverse.com/thing:4719975

I added a hole in the mount that works for both the cable (and has a lip to prevent the cable touching the front fan) and ease of access to the needle's adjustment screw.