Scandinavian Style Watering Can

Scandinavian Style Watering Can

This is a modern, stylish and minimalistic watering can, inspired by some of the comercially available scandinavian designs.

Printing:

• Your printer needs to be tuned to handle a 45 degree overhang without issues!
• Print upside down, so that the spout rests in the print bed.
• 0.16mm layer height recommended for better overhangs.
• 15mm outer brim highly recommended.
• 3 Wall loops
• Top and Bottom shell thickness set to 2mm
• Paint seams like this to improve the overhangs on the spout:
• Supports are not necessary if you have bridging well tuned, but you could paint some on the underside of the handle: