Description
PDFHey friends, here's my latest model.
You can change the size of the X and Y axes,
but DO NOT change the Z axis.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #15 (1.28mm) swap to Red
At layer #22 (1.84mm) swap to Jade White for the rest.
Store: https://thinkto3d.etsy.com
Donate: https://paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8
Commercial license: https://patreon.com/Think_3D/membership
Tags
Model origin
The author marked this model as their own original creation.
