Lamp #8

A tall ribbed 200 mm lamp shade model that can use Lamp Base#2.

https://www.printables.com/model/850873-lamp-base-2

Shade - 200 mm height x 135 Width
w/ Base - 250 mm height 

No supports required.

The fassung-lamp socket ( e14-28 mm):
     https://www.amazon.de/dp/B097K4YNL9

The electrical cable and switch:
     https://www.amazon.de/dp/B002DAOX58

The E14 Bulb used here:
    https://www.ikea.com/de/de/p/solhetta-led-leuchtmittel-e14-470-lm-rund-opalweiss-90498707/

3 x M3 by 10 Screws

    https://de.aliexpress.com/item/32443118299.html?

3 x M12 Mutter (Nut for weighting)

    https://www.amazon.de/dp/B01M30BU88?

3 x M3 Inserts

    https://www.amazon.de/dp/B08BCRZZS3?

The slicer settings for the base:

.20 mm Standard

(All standard settings and speeds, Random seam settings)

Filament:  Sunlu PLA+ White

The Shade:

Filament:  Sunlu PLA+ White

The slicer settings:

.16 mm High Quality and Generic PLA
Infill %  - 30 , Gyroid
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Outer Wall Speed - 60 mm/s
Inner Wall - 150 mm/s

Seam Position- Aligned