Parameterized Rocker Switch Cover Plate and Box

Parameterized Rocker Switch Cover Plate and Box

Messing around with setting up parameters on a model. Uploaded .f3d and .step files for customization.

Edit parameters to your liking.

Print settings for Photo examples:

• PLA
• 0.4mm nozzle
• 0.2mm layer height
• 15% Infill
• used M5 bolts (if you need to change the hole size in cover plate, remember to adjust the thread size in the box to match)
• **Note: Will probably need to re-orientate model in slicer - as seen in renders below

For egress cables, just drill an appropriate sized hole where needed or add one to the model if desired.  Same for mounting options.

Example of 3 switches with 10mm spacing in between.

Example of 10 switches with 20mm spacing in between.

Let me know how this works for you!

-------------------------------------

DISCLAIMER:

The 3D model file/s provided herein is offered as-is, without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. The creator of this 3D model file shall not be held liable for any damages, including but not limited to direct, indirect, special, incidental, or consequential damages or losses arising from the use or misuse of this file.

Users of this 3D model file are solely responsible for determining its suitability for their intended purposes and for the manner in which it is utilized. The creator of this 3D model file does not guarantee the accuracy, completeness, or reliability of the file, and shall not be held responsible for any errors, omissions, or inaccuracies therein.

Furthermore, the creator of this 3D model file shall not be liable for any injuries, damages, or losses resulting from the use, modification, or distribution of this file, regardless of whether such use, modification, or distribution was suggested, advised, or encouraged by the creator.

By downloading, accessing, or using this 3D model file, users acknowledge and agree to hold harmless the creator from any claims, demands, or actions arising out of or in connection with the use of this file.

Added a parameterized box to the original Cover Plate.