Lenovo Tab P11 Gen 2 Case (VIVO STAND-VAD2 VESA)

This is rough first draft of a two part slide case for the Lenovo Tab P11 Gen 2.  Cut out on bottom for home screen gesture (swipe up from bottom when mounted horizontally).

Designed to work with the VIVO VESA Quick Release Adapter (STAND-VAD2)
https://vivo-us.com/products/stand-vad2

This was designed to secure the tablet in an environment with quick release, but also added protection.  If you are looking for a product that allows for quick release with no protection, you should look into something like the VIVO MOUNT-UVM02W or look for another design.

Print instructions:

• PLA or PETG
• Reduce filament usage with draft quality 
• Layer height 0.28mm
• Infill 5% (grid)
• Minimal supports if printed vertically (threshold angle 8°) 
  
   

Assembly instructions:

• Insert VESA mounting screws into the 75x75 or 100x100 mounting holes on the case part with the camera cutout.
• Attach the VESA plate to the back and secure with washers/nuts.
• Slide tablet (camera end) into the case part.
• Insert VESA mounting screws into the 75x75 or 100x100 mounting holes on the second case part.
• Slide the tablet into the second case part (you will have to slightly bend up the VESA plate).
• Secure the VESA plate to the remaining two screws with washers/nuts.
• Secure the slide mount to stand or pole/wall mount (not included).
• Slide the tablet onto the slide mount.