Pikachu fridge magnet

Pikachu fridge magnet - you will need 2 5x2mm magnets. Print with 0.15 layer heigh and add color change stops at these heights: (a 3mf project file for Prusa Mk4 0.4nozzle is included)

base color: black

2.15mm → yelow

3.20mm → white

3.50mm → pink/magenta

3.65mm → red

If the magnet holes are too tight, hold the magnet with tweezers and use a heat gun to heat them, then push them with some force in. Add superglue if needed.