The Gigachab/Balisword

If you've ever wanted a 2 foot long balisong, than this is the model for you. 

I recommend printing the handles and blades flat on the buildplate with rafts. Print 1x blade, 2x handle, 2x bladepin, and 2x pivot. For the pins, I found that the printed pins from the original model were quite brittle, so I cut up a wooden skewer and used that instead (this is optional, although I highly recommend finding something stronger than the printed pins). You can still use screws as weights like in the original design.

quickdraws have never been so fun

I extended the middle. That's about it.