Gopro klite aerobar tt bars mount nylock

Remixed to use m5 nyloc nuts instead of heat inserts. I used a piece if tire innertube as the rubber gasket which was less fussy than  O-rings but either will work. The rubber piece or O-ring makes the mount way solid. 

Also changed the direction of the go pro mount by 90 degrees to work with my bike light application. I made a few different versions for different angles/ mount locations.

I used this to mount my k-lite bike packing light to my aerobars.

I printed  in ASA and pteg both work great

Nice work on the original design, professional job !