Getter Robo - HueForge
My first work of Hueforge with Getter Robo an old Cartoon
1
10
0
129
updated September 3, 2024
Description
PDFPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with BambuLab Green
At layer #7 (0.64mm) swap to Black
At layer #11 (0.96mm) swap to Jade White for the rest.
How about buy me a coffee
Tags
Model origin
The author marked this model as their own original creation.
