1U 19 inch rack front panel mount for one 176mm wide switch, one raspberry pi CM4, two USB-hubs

1U 19 inch rack front panel mount for one 176mm wide switch, one raspberry pi CM4 (with oled display), two 4-port unpowered USB-hubs

1U 19 inch rack front panel mount for one 176mm wide switch, one raspberry pi CM4 (with oled display), two 4-port unpowered USB-hubs

I have tested with cheap unmanaged switches:

• 8x 2.5Gb ports + 1x 10Gb SFP+
• 4x 2.5Gb ports + 2x 10Gb SFP+

You can mirror the two halves in the slicer, if you want to swap sides.

Print the brackets on the front.

No support material needed.

parts used for the raspberry pi :

• Raspberry Pi Compute Module 4
• Compute Module 4 Base Board
• Heatsink
• 128x32 0.91" oled display
• Samsung 256GB PM991 M.2 2242 NVMe SSD MZALQ256HAJD

The two usb hubs are Anker 4-port unpowered usb-hubs (AK-A7516012)
 

Included is the f3d file

This model is a variation on this model or this model