H0 Scale House with Basement "House 1"

This is a kit of a scale model of a fictional house. It is a HO 1:87 scale model. This is my second kit in my collection of miniature houses in HO scale.

It requires assembly and glue. The walls and basement can snap onto the foundation to make a ridged body. The roof, railings, and awning require gluing.

Some printing recommendations:

• Print the walls laying flat with the inside part on the print bed
• For best results, print the roof standing tall, in which the "V" shape is on the print bed.
  • Supports are not necessary
  • The notch should be pointed upwards, so no more supports needed
  • Use a brim or glue for bed adhesion!
• For best results, print at 0.10mm layer height
• Keep in mind, the connectors (studs) on the basement may expand and have reduced clearance after printing. It may be difficult to connect it to the foundations.

Thank you for checking out my model!

Follow my page if you don't want to miss out on new models.