Tokyo Noir: Crimson Rain - Hueforge

A beautiful filament paiting of a busy, rainy Tokyo street.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 2.1
PLA KINGROON Brown Transmission Distance: 5
PLA EryOne PLA+ IVORY WHITE Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Space Gray
At layer #16 (1.36mm) swap to Brown
At layer #17 (1.44mm) swap to IVORY WHITE
At layer #22 (1.84mm) swap to Black
At layer #24 (2mm) swap to Red
At layer #29 (2.4mm) swap to Yellow for the rest.