This model remindes of a one-armed bandit in the casino. You roll the dice inside the tower. When you pull the lever, the dice fall out and you can see the result!
The model consists of 4 parts:
To assemble the tower, push the lever arm onto the top of the dice flip. The connection uses a self-locking mechanism. Please pay attention to the orientation of the handle, otherwise the self-locking mechanism will not work!
The model is printed on an MK4. Please adjust the settings on your personal printer. You know your printer and filament best. The lever arm and the dice flip can use some extra perimeter, as the lever arm can produce high forces on the joint connection.
Thank you for taking a look on my model. I would love to see you guys download it and turn it into a make. If you have any feedback please let me know. I always try to make useful and nice models.
Check out my other models as well here.
You may also visit the profile of a friend of mine who's also making his own models.
The author marked this model as their own original creation.