ZX Spetrum Dandanator Mini V2.1 Case

This is a modification to the standard Dandanator Mini V2.1 Case. I added button covers for shorter push buttons and through holes suitable for M3 screws to allow mounting of the Dandanator PCB and to secure the upper case, with M3 screws. I also added the name of the device on the top case.

I used buttons with 12.8mm posts, from the PCB surface, 9.8mm from the switch body, which I got in a pack of switches from Amazon.

Construction details for the V2.1 Dandanator are available here: http://www.dandare.es/Proyectos_Dandare/Projects_EN.html

Note that I haven’t actually finished making my Dandanator yet, I still await a PLCC socket.

Update: The IF1 versions of the STLs have been modified to allow plugging of the Dantanator Mini onto the back of the Spectrum Interface 1.

Update The IF1 V2 versions of the STLs add a little more space around the joystick socket entry and a couple of wells to allow for some little rubber feet. The left button was also moved slightly to align with my dodgy push buttons.

Print Settings

Printer Brand:

MK3

Printer:

Prusa i3

Resolution:

0.2

Infill:

25%

Filament: Any PLA PLA Any colour