.22 pellet holder mag 2.5 hr print ender v3 base 2hr top
30% infill is enough
m4 bolt shaft 25mm cap head
hole in base for two nuts should fit a nylock as well
50mm wide
deep holes for pellets slugs bb
should fit two pellets or 1 slug
43mm o_ring for 50mm base, can get away with other sizes to fit
assembly
screw m4 through "top" into “base” and into the m4 nut
tighten bolt till turning the “top” feels like its got enough
resistance to not free spin. turn upside down and ca/ superglue nut.
or use the nylon lock nut.
can help if you like with cad work
English or Dutch
The author marked this model as their own original creation.