Solder helper

I decided to remix the original model, due to the choice of a different connector and switch. From the original model, I chose the variant with a 40x10 mm fan. All changes are listed in the changelog below.

The entire model is redrawn in OnShape and everyone can customize it cad.onshape.com.

Parts List

• 2x M3 x 10 hex screw
• 2x M3 x 20 hex screw
• 1x 4010 fan (aliexpress.com) 
• 1x switch (aliexpress.com)
• 1x plug (aliexpress.com)

Printing without supports, Infill: 25%, Material: PLA or PET-G

Share your printed model.

Versions 1 and 2

• The original hole for the DC connector is blinded
• A hole for the DC connector has been added on the back
• The paths for the cables have been slightly modified
• The opening for the switch has been reduced

Version 2

• Holes for non-slip stickers have been added to the bottom
• Added a cover to the bottom (cannot be used in v1)