X-Acto Case Holder for Honeycomb Storage Wall

Made to work with this set from amazon
https://www.amazon.com/gp/product/B00551D4AM

Secure to wall using the M3 inserts (STL included) and M3x8 Socket-head screws.

Printing Instructions

• No supports needed.
• Print as-is for a solid bottom for the box. 
• Print with 0 top/bottom layers with a honeycomb infill to get the hex pattern for the base (as seen in photo). 
  • Play with infill density until the hexs are a size you like.
  • Increase the number of perimeters/wall loops to match the wall thickness. 
    (actual number will vary depending on your setup)