Hueforge Fallout Power Armor - 4 Color

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Beige
At layer #23 (1.92mm) swap to Jade White for the rest.