Benchy Dockyard 26 or 36 Mini Display Rack / Stand

Two smaller versions of the original Benchy Dockyard Display that are designed to hold 26 or 36 of the little guys. The Dockyards measure approximately 6” deep x 3.5” (26) or 5" (36) wide x 12” tall.

You will need 1 base (variations available), 2 frames, 1 top plate (or 1 handle for the 36 version), and as many clips as you would like/want/need to stabilize the frames and/or to add a bit of accent color.

The handle (for the 36 version) and the 7mm clips fit on top in between the Benchys if the top plate is not used.

If you prefer a cleaner look, the top plate (which incorporates clips) can be used with the top plate handle (on the 36 version). Just print this handle a bit stronger to support the weight.

The 24mm clips fit on the sides as shown in the pics. 

The frames slide into the base with a little force. The Benchys are inserted by tilting them upwards and slipping the back of the boat (stern) into their slot. They “hook” in with their little fishing rod holder. The Benchys will hang close to each other, so adding more to your Dockyard Mini may require you to remove some to slip new ones in.

You may choose to use a little bit of glue to keep entire assembly together.

Printed with Overture Cream Purple and Matte Black PLA.

Tolerances are reasonable, but much will depend on your printer setup.