Compact Qtip Dispenser

First of all thank you for the smooth design of the original model qtip dispenser rnd. 

I wanted to use this model because:

• It covers the cotton parts of the q-tips (ear swabs), they stay cleaner in than other open models.
• You can grab a few from bottom without exposing rest.
• Smooth surfaces obviously :) 

The model requires supports, auto-generated tree supports worked well enough for me.

Printing summary:

• Using Creality Ender 3 V3 SE - 0.4mm nozzle
• 0.16mm layer height with %5 infill, tree supports 
• 4h 50m print time:
  • 4h 30m for the dispenser
  • 20m for the lid
• 56 grams of PLA filament used in total (5 grams for support)

The differences this model has:

• Smaller (85x45x91mm), this is for less space and fitting my type of swabs in (75-80mm). I managed to fit 100 of them (see photos)
• Raised a bit from bottom (around 8mm) which eases to grab swabs I think.
• Removed the “Q-TIP” writing from front side, to be honest I don't call them q-tips :) 
• The lid is also smaller and more compact. It does not lock in, but fits perfectly

The differences this model has:

• Smaller (85x45x91mm), this is for less space and fitting my type of swabs in (75-80mm). I managed to fit 100 of them (see photos)
• Raised a bit from bottom (around 8mm) which eases to grab swabs I think.
• Removed the “Q-TIP” writing from front side, to be honest I don't call them q-tips :) 
• The lid is also smaller and more compact. It does not lock in, but fits perfectly