Crystal Salt Shaker

Add flavor to your dishes with the natural beauty of a quartz crystal shaped salt shaker.

This model is designed to be printed in vase mode. One should print 4mm of bottom infill; that is 20 layers at 0.2mm layer height. Print with larger external perimeters (e.g. 0.55 mm) for tougher print. Both the shaker and the screw can be printed at once using sequential printing. See .3mf for more info. 

To put the screw cap in, the easiest is to put it flat on top, press it in and then screw it a bit. It doesn't have to sit flat to hold.

Source files can be found at : https://cad.onshape.com/documents/0831fa6222c0b0d8332bb702/w/d2ae511a42f9f6e884c958ee/e/aa655f3649436fb454a2527a?renderMode=0&uiState=6620e37bd0669a68ed3178de