Modern minimal DIY lamp with 70mm downlight

This is a easy to print full lamp, only things you will need is a 70mm downlight and glue. If printing the base and legs separate for dual color finish then the downlight springs will keep both parts together, if you want a permanent fixing then m4 or m5 screws will fit in nicely.

For fixing the top/ Light defuser on then a couple drops of glue around where the 45 degree champers will fix it together.

Print the base and legs in one go for single tone and print at 15% infill with atleast 4 thickness wall count for a strong model, increase wall thickness for the best results.

Light- Any LED 70mm downlight should work and most come these days with wall outlet plugs on them, they are extremely useful for adjusting color temp