Tool-less 2.5" Hard Drive Caddy/Sled for Supermicro Server (Press-Fit)(HDD or SSD)
Description
PDFDesigned for the older generation but ubiquitous Supermicro Caddies. Part # SB16105 or MCP-220-00047-0B
HDD Status LED's are functional with additional 2mm AND 1mm fiber-optic cable. I've used THIS by searching "fiber optic 2mm" and "fiber optic 1mm"
I have a pair of 2mm cables in the caddy face and a 1mm pair in the sled so they can separate.
You could probably print the caddy face in different colors to designate specific HDD's or different HDD pools.
Depending on how hot your HDD's are, you may want to use a different filament other than PLA because of PLA's low deformation temperature
To split the model into each individual object:
(In slicer) Right-click model → split → to object
PRINT SETTINGS I'VE USED:
Nozzle: 0.4mm
Layer Height: 0.2mm
(Feel free to experiment and change what you like)
Any setting not listed below are assumed to be default
| 2.5" Caddy Face | ||
| Walls | 2 | |
| Top Surface | Concentric | |
| Top Shell Layers | 0 | required for visible infill pattern |
| Bottom Surface | Concentric | |
| Bottom Shell Layers | 0 | required for visible infill pattern |
| Sparse Infill Density | 10% | change to desired infill pattern |
| Sparse Infill Pattern | Honeycomb | change to desired infill pattern |
| Infill Direction | 60 degrees | change to desired infill pattern |
| Enable Supports | Yes | possibly needed for grill snap-fit |
| Type | Normal Auto | |
| Style | Snug | |
| 2.5" Sled | ||
| Walls | 3 | |
| Enable Supports | Yes | possibly needed for tool-less studs & grill snap-fit |
| Type | Normal Auto | |
| Style | Snug | |
| Threshold Angle | 10 Degrees | to prevent generated supports in fiber-optic holes |
| Brim Type | Outer Brim Only | for bed adhesion |
Current Version: v1
**It's possible that different versions of Supermicro chassis may be incompatible with this model. Result may vary**
Tags
Model origin
The author marked this model as their own original creation.
