Airsoft / Nerf Resetting Target Simplified

REMIX CHANGES: I combined the three pieces that constitute the supporting structure/base for the target. The original relied on gravity, and maybe some friction to keep the structure together. This version is stronger and more rigid, but less easy to store as you can't deconstruct the base. 

Works well when weighed down as an airsoft target. Target resets itself. 

How to print:

Don't combine the models into one when importing into your slicer, keep them separate. Use 100% infill. See screenshot for positioning. I printed the cylinder on one of it's flat sides with an outer brim so it doesn't go anywhere. I printed in PLA+, and my 11.1v LiPo full auto ICS CES A4 didn't leave a mark on the target at all.

How to use:

Do use something to weigh down the base, otherwise it will fly off. If the target doesn't want to reset properly, you maybe didn't use 100% infill, or one of the two related parts doesn't have a perfect circle.

I combined the three pieces that constitute the supporting structure/base for the target. The original relied on gravity, and maybe some friction to keep the structure together. This version is stronger and more rigid, but less easy to store as you can't deconstruct the base.