FPV Drone Wall Hanger V2 (3M Command Strip)

Features

• Wall hanger for 2.5" or larger quads (check your dry weight vs single 3M Command strip max load)
• Uses single 3M Command Strip (Max. Dimensions: 70 x 20mm)

Changes from V1

• Increased depth for drones with thicker arms
• Wider/taller retainer plates to hold the arms more securely

Print Settings

• Printer: Creality Ender 3
• Filament material: PLA
• Resolution: Default or finer
• Wall Ordering: Outside to Inside
• Supports: Yes
• Infill: >20%
• Infill Pattern: Hexagonal/Tri-Hexagonal
• Nozzle Temp: 220°C
• Bed Temp: 60°C
• Print Speed: 100mm/s
• Rafts: Doesn't Matter
• Notes: Depending on your first layer quality, some sanding and cleaning might be needed for better adhesion. After sanding, rinse and dry. Use any tape to stick off excess dust/particle before applying 3M Command Strip