Bambu Lab AMS Custom Front Roller

Having wider roller will make your spools turn faster, improving load/unload time, and also reduce a lot the filament respooling rewind failure.

Silicone tube also improve the friction between roller and spools.

Install

1. Remove the rubber from the front roller using a razor blade to assist. 
2. Once removed, clean the roller (remove the glue residues as much as possible) and insert the new part.
3. Insert the silicon tube over the printed part. You might use glue to help with keeping the silicon tube on the printed part. 

Model Updates

Solved the issue with original AMS compatibility.

Parts

Silicone tube of 10/14 (ID/OD)

Made model compatible with OEM Bambu AMS system.