2040 Aluminium Profile - Voron Style Nema 17 Motor Mount

Voron style NEMA 17 stepper motor mount for any 2040 aluminium extrusion. 

• Use some supports for the top part, or you could get some drooping. Also make sure to use heat resistant filament such as PETG, ABS or ASA. PLA might work if your motor doesn't heat much.
• Use 5 to 10 walls, 10 bottom and 10 top layers, and 50% infill or higher, for the strongest part. 

!!! Make sure your bed isn't too low, or it might collide with the top of the motor mount !!!

This model is mainly for me not to lose it.