Soft Hex Planter Pot with Drainage Holes and Drip Tray

A hexagonal based planter pot with drainage holes and a custom sized drip tray.

The planter walls are 3mm thick so it is plenty strong. There are 7 drainage holes in the bottom of the planter to account for over watering. The drip tray is custom sized to hold the planter up just a little bit for letting any drips evaporate and dry.

Printing:

You can print this without support as the steepest angles are 45 degree angles. I printed this with 1mm walls, 40% gyroid infill, and at a max speed of 70mm/s with all of my prints, which is why the print time is long. But printed with Polymaker PolyTerra Matte Marble PLA Filament in the Marble Brick color makes a beautiful and strong print.

Depending on your bed adhesion I suggest a brim to help from warping the bottom of the print.