RACK IT 1000KG Bag Holder
Bag holder for use with "RACK IT 1000KG Mounting System".
3
14
0
189
updated April 23, 2024
Description
PDFRemix of Augustas Kazlauskas Bag Holder to suit RACK IT Mounting System.
I printed upright. 0.2mm PETG. No Supports.
I used two M4 x8mm bolts to secure.
This also requires the “RACK_IT_Hook.3mf” from the RACK IT 1000KG Mounting System.
https://www.printables.com/model/843070-rack-it-1000kg-mounting-system
Tags
Model origin
The author remixed this model.
Trash bag holder
by Augustas KazlauskasThis source model was used for remixing before its license was restricted.
Differences of the remix compared to the original
Added Rack IT mounting key/bracket.
I removed filleted (rounded) bottom edges and replaced with bevel (45 degree) for better printing.
Shortened the height to save filament, and as this design is to stand upright as bags shouldn't need as much support.
