Minimalist Magsafe Charging Stand (Standby Mode)

This is a minimalist magsafe charging station. It works both on portrait or landscape orientation.

You can choose between 3 design available :

• Magsafe stand + Magsafe base
• Magsafe stand + Samsung wireless base
• Magsafe stand

You can also choose between the logo or no logo magsafe cover stand :

Miscellaneous:

• Magsafe stand + Magsafe base
  • 2 * Magsafe charger
  • 13 * M3 brass insert
  • 13 * M3x8 countersunk screw
     
• Magsafe stand + Samsung wireless base
  • 1 * Magsafe charger
  • 1 * Samsung wireless EP-P2400 charger
  • 9 * M3 brass insert
  • 9 * M3x8 countersunk screw
     
• Magsafe stand
  • 1 * Magsafe charger
  • 9 * M3 brass insert
  • 9 * M3x8 countersunk screw

Assembling:

The assembly is pretty straighforward, here are some tips:

• Make sure to run your cable through the arm and base before screwing them together
• Make sur to leave enough slack before screwing the magsafe stand cover
• You should run the stand cable first before the base cable
• Do not overtighten the magsafe stand cover screw as the front face is very thin
• Use vhb tape to fix the base on your desk

Print settings:

• PLA or PETG
• Layer height : 0.2 mm
• No support (except on the base as shown below)
• Print orientation :