G25/27/29 Wheel Direct Adapter (less weight)

G25/27/29 Family Direct Adapter for aftermarket wheel.

The main benefit to use this one is remove some weight to not force the motors.

Logitech G family was designed to work with original wheel weight and diameter, when put an aftermarket wheel with greater wheel diameter/weight on it, it could decrease the lifetime of motors and circuit.

So I decided to design this one for lighten weight for the motors, since it will not use some parts such as: Intermediate plastic part; circuit board; pedal shift, etc.

For me, when using aftermarket wheel I dont need to use pedal shift, So if you don't need pedal shift and want remove some weight, this one is for you.

Will need

• 6x m5 nuts

Specifications

• Diameter between holes: 70mm

Print Settings

Printer Brand:

Creality

Printer: 

Ender-3 v2

Rafts:

No

Supports: 

No

Resolution:

0.2mm

Infill: 

100%

Filament: PETG/ABS

How I Designed This

Basically I disassembled my G27 wheel, I used a caliper to measure all and designed it in FreeCAD.

I upload the ".FCStd" file too, it is the editable file to use in FreeCAD.

Category: Games