PrismLume small and medium version

This is a small and medium version of PrismLume.

Small has side of 3 leds only, so in total you will need only 19 leds and it prints super fast.

Medium version has side of 6 leds and in total you will need 91 leds. 

Use caps from the original version, they fit perfectly:

https://www.printables.com/model/836762-prismlume

Everything else is the same as in original module, see detailed instructions there.

Short-cut: you will need wled setup to make it work - wled.me.

I print with PETG as PLA doesn't like neither hot temperatures nor exposure to light.

Everything can be printed with 0.20mm wall. 

Models are available on onShape, feel free to make a fork:

https://cad.onshape.com/documents/f910871830ace6840e0cf0e4/w/121b1cb39875ebc865a08099/e/f622cd56342b1a273a1aad51?renderMode=0&uiState=661d1ed389d8d33628835ad3

update 2.2.3

Added cover for 3x3 without inner fillet (rounding) for a tight fit.
 

This is a small and medium version of PrismLume.

Small has side of 3 leds only, so in total you will need only 19 leds and it prints super fast.

Medium version has side of 6 leds and in total you will need 91 leds. 

Use caps from the original version, they fit perfectly:

https://www.printables.com/model/836762-prismlume

Everything else is the same as in original module, see detailed instructions there.

Short-cut: you will need wled setup to make it work - wled.me.