This EVA 3 mod is for modular fans that are quick swapable.
This mod does require rewiring the fans system and the following parts.
Wire the end of the JST connector to the magnets (1 wire going to each magnet)
Do the same on the other side (from fan to magnet)
Plug the JST from the board into the main plate.
Soldering the wire to the magnet to ensure a good connection then gluing it into the printed parts.
DOUBLE CHECK YOUR WIRING BEFORE USING, RED TO RED, BLACK TO BLACK, wiring fans in series.
This mod is in current testing and is a full BETA, whatever damage is done to printers is not my responsibilty.
Also currently working on other EVA mods, like nozzle tap probing, coming soon (hopefully)
The author marked this model as their own original creation.