Toothpicks magnetic holder for fridge in beautiful 3-Layer Design.
No support needed.
There are 2 versions of them:
Open:
and closed with backwall:
You can print these smooth as they are, or with activated Fuzzy skin, I used 0,3mm x 0,3mm Settings:
Used magnets: 10mm diameter with 2mm height.
Each Magnet is glued with one drop of PLA Glue.
I used 4 Magnets, but 2 of them would be also enough for Toothpicks.
You can also try with smaller diameter magnets with 2mm height.
I have few KuMa magnetic Holders in different Versions which I will upload in next days, please check my uploads in my profile. If you need one in special dimensions or Heights (2-Layer, 3-Layer, 4-Layer, …), please let me know :).
The author marked this model as their own original creation.