PrintAirPipe – Printable pipe system – complete set *updated 06.2024*

The PrintAirPipe System is a 3D printable pipe system. Using the different pipe segments, an individual and customizable exhaust or supply air system can be set up. Ideal for conveying the exhaust air from a soldering station, 3D printer or similar to a suitable filter system or wall outlet.

The PrintAirPipe system consists of different segments that can be individually connected to each other.

UPDATE 09.06.24:
I added several new segments to the complete set. As soon as I have more slots to sell items here I will also offer some segments as a standalone product. Meanwhile you can find seperate segments at Nerdiy.de/papp.

There are currently the following segments:

• AirFlowSensor Segment (Added 09.06.24)
• 360° intake segment (Added 09.06.24)
• Air Sensor Segment (Added 09.06.24)
• Inch Adapter Set (Added 09.06.24)
• 50mm Pipe segment set (Not included in this set yet)
• Servo Valve
• Flange segment
• Butterfly valve segment
• 120mm fan insert
• Filter segment
• Adapter to 100mm PrintAirPipe standard
• Adapter to 80mm PrintAirPipe standard
• Adapter to 50mm PrintAirPipe standard
• 90° connector
• 45° connector
• 22.5° connector
• Y-distributor segment
• Y-distributor straight segment
• Extension 50mm
• Extension 100mm
• Extension 150mm
• Extension 200mm
• Cover cap

Interested in a single segment only?
See all available segments here:  https://nerdiy.de/papp

Interested in a smaller pipe diameter?
There is now a 50mm version available here: https://www.printables.com/de/model/921501-printairpipe-50mm-pipe-system-complete-set

Looking for ESPHome/Firmware configurations?
See all available configurations here: https://github.com/Nerdiyde/ESPHomeSnippets/tree/main/Snippets/PrintAirPipe

Material List (Affiliate-links):