Magnetic holder for DS18B20 temp sensor module

An open holder with magnet for the Risegun DS18B20 temperature sensor module.
1
6
0
143
updated April 14, 2024

Description

PDF

The Risegun DS18B20 temperature sensor module is suitable as a chamber temp sensor for the Xtouch. I had to get it out of the print head's way and I had limited mounting options in my P1S due to the short wires so I thought a holder with a magnet to clip on to the frame would be perfect. 

Print settings:

I would recommend you print it in ABS or ASA due to the possible high temperatures in the chamber.

Print with the hole for the magnet facing down. Enable supports and set “Style” to Snug and “Support/Object XY distance” to 0.7 mm and you should have no problem removing it.
Fit a round 10x3 mm neodym magnet in the hole and fix with a drop of glue. It's a snug fit so I had to deburr the hole to make it fit.

Tags



Model origin

The author marked this model as their own original creation.

License