Voron 0.2 ZeroClick Rear Mount

I needed a rear-mount ZeroClick for my Voron 0.2r1. I couldn't use the centre-mount due to MFNano taking up the space under the rear gantry. However, when I used the stock rear-mount I lost lots of Y-travel.

I modified the ZeroClick rear mount so that it fits the X-gantry perfectly. Sensorless homing now finds the full depth of the Y-axis.

Additionally I moved the mount 2.5mm forward to better engage with my DragonBurner v8.

Printed at standard Voron settings but requiring a small support.

Klicky Variables:

variable_docklocation_x: 8
variable_docklocation_y: 120
variable_docklocation_z: -128

Variable_dockmove_x: 0
Variable_dockmove_y: -30
Variable_dockmove_z: 20

Variable_attachmove_x: -20
Variable_attachmove_y: 0
Variable_attachmove_z: 20

Space for X-axis mount.

Moved 2.5mm forwards.