Parametric Two Tone Flower Pot - Single Body and size remix

Remix of the model from sambarron. The original did not match the size I needed. I also wanted to print it on my multicolor machine so I changed the geometry (removed the groove) and exported it as a single 3mf file. I also noticed that the overhangs where to steep at the bottom (for my filament / settings) so I changed the shape a bit to reduce the angle. I also removed the hole in the bottom, as I planned to use a inner pot.

Proposed print settings are provided with the *.3mf files.

• Changed the geometry to allow easier multicolor print
• changed the pot size to 15.5cm (ID) x 14.7cm (height)
• removed hole in the bottom
• Changed curve of the pot to reduce overhang angle at the bottom