Fabric Pencil

This Tool has an expandable Tip and is made with TPU to secure the fabric, the pencil (Griffstück) is made with pla.

I made the Tip (Spitze) expandable for future designs. 

No glue needed.

My Print Settings for both Files:

0.2mm Speed with IS

20% Infill

Support: yes

Print time for the Pencils was about 28min, the Tip 5min.

The TPU was not in the Dryer before i printed the tip, so the picture shows a not so nice finish. 

But it works fine.

Have fun  and feel free to comment.