Check out Prusa's Black Friday Deals. Only valid until December 3rd!

9.3X74mm Rimmed, Head Up, Double Snap Latch, Split Hinge Modular Ammo Box

The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
This is an exclusive model available only to supporters of the creator.
Your funds support the creator's further activity.
$5 /month
0
0
15
updated November 30, 2024

Description

The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid.

Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options.

Other ammo boxes of this type can be found in my Pocket Snap Latch Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/492778.

This cartridge box is printed as separate parts that are printed in orientations chosen to maximize strength and then snapped together.

The box halves require moderate infill (10%-20%) and can be printed with no supports, but I prefer to paint on supports under the flat sections on the latch hoops and the latch catches. I printed with 0.16 layer height in PLA.

Do not use Perimeter Generator: Arachne on the box bottoms.

Assembly instructions:

Push the tabs of the latches through the latch hoops on the box lid until the latch tabs fully lock in place.

Category: Tool Holders & Boxes

Tags



Model origin

The author marked this model as their own original creation.

License