One-Punch Man HueForge

5 color image

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Pink
At layer #9 (0.8mm) swap to Savannah Yellow
At layer #10 (0.88mm) swap to White
At layer #17 (1.44mm) swap to Charcoal Black
At layer #19 (1.6mm) swap to Red
At layer #20 (1.68mm) swap to Pink
At layer #22 (1.84mm) swap to Savannah Yellow
At layer #23 (1.92mm) swap to White for the rest.

Since I only have one AMS to be able to use 5 colors, I set a pause at layer 19 to do a manual filament change and replace black with red