Filament guide for Prusa Printer

I had some problems with just printed filament guides, so I created a quick model to add a bearing which helps with smoother filament movement.
 

What will you need:

• Bearing - 608ZZ 8mm

Used material: 

• PLA or PETG

Print settings:

• Part 1: print on side with supports, 0.2mm layer height
• Part 2: print on ‘back’ with supports, 0.2mm layer height

Assemble:

• Put the bearing on part 1 to the bearing holder
• Click in part 2
• Put the filament guide on a printer frame and guide the filament through the hole

Note: was tested on MK3S+, should be ok for any printer from Prusa with same frame.